|
|
1992 Specifications
1992 RT/10
| STANDARD EQUIPMENT | | | Itemized List: |
- Tubular space frame with center spine structure
- Side mounted stainless steel dual exhaust system
- Composite body panels with fiber reinforced skin
- 4-wheel independent suspension with unequal length
- Upper & lower control arms, coil over shock design
- Double acting Koni gas shocks with rebound adjustment
- Tubular design front & rear sway bars
- Rear wheel drive with limited slip differential
- Leather wrapped steering wheel and shifter knob
- Power assisted rack & pinion steering
- Energy absorbing tilt steering column
- Forward-hinged one piece clam shell hood
- Two-way manual seat adjusters with linear recliner
- Air conditioning prep
- A/C wiring harness
- Adaptable instrument control panal
- Preset engine electronic control unit
- Power assisted, four piston, four wheel vented disc brakes
- Aluminum directional three-spoke silver wheels w/6 bolt mountin flange
- Front: 17" x 10"
- Rear: 17" x 13"
- Spare: 16" x 4" (8 spoke)
- Michelin XGTZ speed rated directional tires
- Front: P275/40 ZR17
- Rear: P335/35 ZR17
- Spare:T155/80 D16 Michelin
- Aero polyellipsoid/halogen headlamps
- Fog lamps with removable lens covers
- Bold graphic white-faced analog gauges
- Tonneau cover with nylon center zipper
- Folding top(Plastic), plastic zipper-windowed side curtains/removable rear window
- Premium Sound System -- AM/FM/Cassette stereo with seek/scan
|
| VEHICLE IDENTIFICATION NUMER (VIN) INFORMATION | | | First VIN: | 1B3BR65E*NV100001 | | | Last VIN: | 1B3BR65E*NV100285
* represents check digit | | | Total Production: | 285 | | | Total Red Exterior Production: | 285 | | | Total Black Exterior Production: | 1* | | | Total Yellow Exterior Production: | 1* | | | Total Green Exterior Production: | 1* | | | Total Gray Interior Production: | 285 | | | Total Black Interior Production: | 1* | | | Unique Features: | 1992 Models have an external radio antenna mounted on the drivers-side rear fender. These early cars also have their batteries mounted in the center of the trunk between the frame rails. The battery is only accessible through the trunk. Early 1993 model year Vipers also have these features.
* Exterior color changed (from red), interior color changed (from gray) by factory as development/trial. |
| ENGINE | | | Size: | 488 CID (8.01 liters) | | | Horsepower: | 400 at 4600 RPM | | | Bore: | 4.00 in. (101.6 mm.) | | | Stroke: | 3.88 in. (98.5 mm.) | | | Torque: | 465 Foot Pounds at 3600 RPM | | | Firing Order: | 1, 10, 9, 4, 3, 6, 5, 8, 7, 2 | | | Ignition: | Electronic Direct | | | Fuel Injection: | Sequential Multiport Electronic | | | Compression Ratio: | 9.1:1 | | | Spark Plugs: | Champion RC 12 LYC | | | Spark Plug Gap: | .035" (0.9mm) |
| PERFORMANCE (APPROXIMATE) | | | 1/4 Mile Time: | 165 mph (264 km/h) | | | Acceleration 0-60: | 4.6 sec. | | | Maximum Speed: | 12.9 sec @ 113.8 mph |
| DRIVETRAIN | | | Transmission: | Borg Warner T-56 6-speed manual | | | Gear Ratio's: |
| Gear |
Ratio |
Overall Ratio |
(Rpm)Mph |
| 1st |
2.66:1 |
8.17:1 |
(6000) 56 |
| 2nd |
1.78:1 |
5.46:1 |
(6000) 83 |
| 3rd |
1.30:1 |
3.99:1 |
(6000) 114 |
| 4th |
1.00:1 |
3.07:1 |
(6000) 148 |
| 5th |
0.74:1 |
2.27:1 |
est (4950) 165 |
| 6th |
0.50:1 |
1.54:1 |
est(3360) 165 |
| Reverse |
2.90:1 |
N/A |
N/A |
| | | Final drive ratio: | 3.07:1 | | | Engine rpm @ 60 mph in 6th: | 1220 |
| BORG WARNER T-56 6-SPEED TRANSMISSION GEAR RATIOS | | | Fifth: | | | | Sixth: | | | | Reverse: | |
| ENGINE | | | Images: |  |
|
|
All Content Copyright 1992-2017 International Viper Registry - All Rights Reserved. IVR, International Viper Registry, and The Viper Registry are trademarks of The Viper Registry.
theviperregistry.com
